- Product and Technical Development -
No.3
Sprue Reaming Cutter
 |  |
| Service Parts | Sprue Reaming Cutter (PAT.) |
| Characteristics |
 |
Be made up minimum draft 0.5 degree. |
|
The most rigid plural teeth. |
|
Round of tip of 0.75 to 1.75R. |
|
Diameters of tip are 1.50 to 3.50. |
|
Unnecessary finishing or polishing of machined after. |
| Advantage |
|
Shortened processing time. |
|
Volumeless sprue. |
|
Reducing cooling time. |
|
Good application to high tmperature molding. |
| R of Tip | Diameter | Length of Blades | No. of Blades | Angle | Price |
| 0.75R |  1.5 | 38 | 4 | 0.5 ／ 1 | 16000 |
| 1 R | 2 | 50 | 4 | 0.5 ／ 1 | 16000 |
| 1.25R | 2.5 | 55 | 4 | 0.5 | 14000 |
| 1.5 R | 3 | 65 | 6 | 0.5 | 14000 |
| 1.75R | 3.5 | 75 | 6 | 0.5 | 16000 |
- Prices are Japanese Yen F.O.B. basis.
- 1 set contains 5 pieces.
|
|
SHINKO SELLBIC CO., LTD. |
| 3-14-5 Hatanodai Shinagawaku Tokyo 142 |
| Tel:03(3785)7800 Fax:03(3785)7899 |
Maintained online by persocom@sellbic.com
Copyright © 1996 Shinko Sellbic Co., Ltd.